I think that, in this day and age, everyone should have a NAS at their house. For those of you that don’t know what I’m talking about, NAS stands for ‘Network Attached Storage’. A NAS is handy for storing all sorts of things, primarily backups of your computers and your media. In my case, I have a lot of movies and TV shows for my various media players. I also have a ton of photos and videos from over the years, as well as from my drones. Having a large NAS means that I don’t have delete anything. My NAS also acts as a server for various other things that I’ll get into in another post.
For your NAS to be effective, it needs to have lots of space and have enough room to expand. You also need to have an effective operating system running the NAS. For this build, I’m going to use FreeNAS. I had been planning to build this thing for a while, but didn’t get around to finally getting everything setup and running until July 31, 2015. Since then it’s been running pretty stable, but I used an Intel G3220 and 8GB of RAM when I first put it together and I’ve outgrown that processor and RAM, so it’s time for an upgrade. Here’s the hardware list of everything that’s going into the machine:
- Intel Core i7-4790K CPU
- ASRock Z97 EXTREME6 ATX LGA1150 Motherboard
- G.Skill Ripjaws X Series 32GB (4 x 8GB) DDR3-1600 Memory
- 6x WD Red 3TB 3.5″ 5400RPM HDD
- Rosewill RSV-L4412 - 4U Rackmount Server Chassis, 12 SATA / SAS Hot-swap Drives
- EVGA SuperNOVA 1000G2 1000W 80+ Gold Certified Fully-Modular ATX Power Supply
The only thing that’s carrying over from the previous build are the 6 WD Red 3TB hard drives and the actual FreeNAS install. I was going to just upgrade the CPU and the RAM, but some pins got bent on the ASUS Z87-A motherboard I had, so it needed to get upgraded too. I also figured that while I was at it, I’d put it in a nice rackmount chassis too.
The build went rather smooth. I pulled the hardware out of the old mid-tower case and moved it into the rackmount chassis. I had originally planned on using some M.2 SSDs for boot drives, but ran into some issues. First, the drives I bought weren’t compatible with the Ultra M.2 slot on the motherboard. Secondly, the other M.2 slot ate two of my SATA ports on the motherboard. Because I didn’t bother to read the manual, it took me quite a while to figure out why those two drives weren’t being seen by the BIOS. Ultimately, I got everything put together and all 6 drives were being recognized. FreeNAS booted right up without any issues. I’ll probably pick up an Ultra M.2 SSD in the future to use as L2ARC since it’s so freaking FAST.
More info will be posted soon on how I’m going to automate my media collection and sharing.